Build done ✔️
Next step : primer coat on leg parts
See you soon 😉
RG Freedom Gundam 1/144 #01
Tag Archives: gunpla builder
[War40k] Blood Angel
After a lot of mechas, I take few times to paint a warhammer 40,000 figurine.
Someone offer me 2 space marines, so I built one for fun. For the color scheme, I chose the blood angels.
See you soon 😉
« The mine sweeper » (1/144 HG RX-79 G)
« An old RX-79 mobile suit that had been lying around in the forest for a long time. It was fix to go and help out those partner of the 8th team who fell in battle in the guerrilla zones. It has suffered a lot during its career but it still works. It can also be used as a support unit with its 180mm gun.«
[ngg src= »galleries » ids= »2″ display= »basic_thumbnail » thumbnail_crop= »0″]Its dedicated gallery : https://flashfan981.com/index.php/the-mine-sweeper-1-144-hg-rx-79-g/
Salt technic on gunpla
Today, we speak about a ‘simple’ technic to creating chipping on model kits : The salt. Yes ! You’re read correctly, a simple salt to obtain a nice chipping on your gunpla. It’s a technic which work with an airbrush. I think it cannot work with brush … But I’m not sure. Maybe I will test one day.
I make a HG Jo hound model kit few month , and I wanted to obtain a heavy chipping. I decided to use only my brushes and little pieces of sponges. But this time, I decide to use the salt.
Prepare your model
First, you need to prepare the surface of your gunpla. For the example, I use the hand of the HG RX-79 ‘Ground type’ (1/144) from « the 08th team » anime.
Like for a classic preparation, I use a primer. In this case, I was a black primer from Vallejo mecha color. After, I added the rust coat. I used a red/brown primer color from GreenStuffWorld. You must a really hard paint because we will be ‘violent’ in a future step.
The Salt technic
Now, it’s time to use the salt.
Put some water gently at the surface of the piece where you want obtain chipping (often on the edges). Personnaly, I used a little sponge. Then put the salt directly on the piece like it’s raining salt. It will be trap by the water. To obtain various effect, try to use different sizes of salt. In my example, I used a really fine salt to try to respect scale.
Some advises :
- Don’t forget to protect the parts where you do not want salt.
- You can do that directly in your kitchen … because you’re going to salt everywhere … Believe me.
- WAIT ! To paint, you need to have a dry salt, so wait ! … 8 or 12h in a dry place ?
Paint (when the salt is dry)
Paint your part as usual, the salt will work like a mask. You can use a pre-shading if you want. But becareful to the pressure you use on your airbrush. If the pressure is too high, the salt will be remove. On this example, I worked with the Mr. color white C1 diluated at 50% and applied at 1bar.
Salt chipping
To finish, You must remove the salt. I used a toothbrush with some water and I brush … brush … and brush again. If you remember, I said you must use a hard and dry paints. That is the moment where you’re going to see if your paint it’s good.
Salt chipping on gunpla is a good way to have random chips on a your paint. I think it’s a simple technic which give good results.
See you soon 😉
MG Exia #05
Introduction
Definetly, I love this model kit. So I take my time to obtain the best result I can. For this post, I will speak about the custom base coat paint and the panel lines work. I don’t like the base plactic aspect of the model kit. So I prefer a custom paint gunpla.
A good way to improve the general aspect of the gunpla, for me, it’s to use the black and white technic before to paint the main color.
Technic : the black and white in action
Like on my previous work on the MG Exia, I painted a black primer coat first (ref : vallejo mecha primer black 70.642) . Then I highlighted the parts with white paint (ref Mr. Color : C1). To finish, I applied the base coat with the desired color.
I used this method for all the pieces, It’s long but I like the final apparence of the gundam.
Did I say I love this Cobald Blue (ref Mr. Color : C80) ? 😍😍😍
Final painted result
After several hours of painting, this is the finish work. I’m really happy of the final result. I think the paint imprive the volumes … isn’t it ?
Panel lines
After that, I put a gloss varnish coat (ref : Mr Color. C46) which is very important to protect the previous work. It was ready to receive the enamel juice to improve the panel lines. Like usual, I used the panel line accent color product from Tamiya which is a perfect product for me. When I have more time, I made it myself with a classic black enamel paint thinned with white spirit. To clean it, I used zippo lighter fluid 😉 with cotton sticks or a little brush.
I don’t finish all the mecha for the moment but this is some photos without and with the product applied on some parts.
I hope this post will be useful to improve your gundam and to work on a custom paint gunpla. Don’t hesitate to write a comment and to share of you like 👍.
See you soon for the waterslides 😉.
Star Wars legion AAT #01
I put my MG Exia on the side for few weeks. I prefer finish this star wars legion model kit : AAT char. You can see this vehicule in episode 1 and the animated serie clone wars.
It’s for me the occasion to try a lot of new technics and paints. For example, I used liquid mask with a succession of different colors for the chipping effect. I use the Mr. Color paints which is just … amazing. Moreover, this product is really durable and strong, I hope the color will stay like that.
It’s not finish but the most important is to take a lot of fun.
I put all the photos in his own gallery.
See you soon 😉
