Category Archives: weathering

[War40k] Blood Angel

After a lot of mechas, I take few times to paint a warhammer 40,000 figurine.

Someone offer me 2 space marines, so I built one for fun. For the color scheme, I chose the blood angels.

See you soon 😉

Blood angel by Flashfan981
Blood angel by Flashfan981
Blood angel by Flashfan981
Blood angel by Flashfan981
Blood angel by Flashfan981
Blood angel by Flashfan981
Blood angel by Flashfan981
Some details of the socle

« The mine sweeper » (1/144 HG RX-79 G)

« An old RX-79 mobile suit that had been lying around in the forest for a long time. It was fix to go and help out those partner of the 8th team who fell in battle in the guerrilla zones. It has suffered a lot during its career but it still works. It can also be used as a support unit with its 180mm gun.« 

[ngg src= »galleries » ids= »2″ display= »basic_thumbnail » thumbnail_crop= »0″]

Its dedicated gallery : https://flashfan981.com/index.php/the-mine-sweeper-1-144-hg-rx-79-g/

Salt technic on gunpla

Today, we speak about a ‘simple’ technic to creating chipping on model kits : The salt. Yes ! You’re read correctly, a simple salt to obtain a nice chipping on your gunpla. It’s a technic which work with an airbrush. I think it cannot work with brush … But I’m not sure. Maybe I will test one day.

I make a HG Jo hound model kit few month , and I wanted to obtain a heavy chipping. I decided to use only my brushes and little pieces of sponges. But this time, I decide to use the salt.

Prepare your model

First, you need to prepare the surface of your gunpla. For the example, I use the hand of the HG RX-79 ‘Ground type’ (1/144) from « the 08th team » anime.

Like for a classic preparation, I use a primer. In this case, I was a black primer from Vallejo mecha color. After, I added the rust coat. I used a red/brown primer color from GreenStuffWorld. You must a really hard paint because we will be ‘violent’ in a future step.

The Salt technic

Now, it’s time to use the salt.

Put some water gently at the surface of the piece where you want obtain chipping (often on the edges). Personnaly, I used a little sponge. Then put the salt directly on the piece like it’s raining salt. It will be trap by the water. To obtain various effect, try to use different sizes of salt. In my example, I used a really fine salt to try to respect scale.

Some advises :

  • Don’t forget to protect the parts where you do not want salt.
  • You can do that directly in your kitchen … because you’re going to salt everywhere … Believe me.
  • WAIT ! To paint, you need to have a dry salt, so wait ! … 8 or 12h in a dry place ?
It’s seems to be dirt, don’t worry !

Paint (when the salt is dry)

Paint your part as usual, the salt will work like a mask. You can use a pre-shading if you want. But becareful to the pressure you use on your airbrush. If the pressure is too high, the salt will be remove. On this example, I worked with the Mr. color white C1 diluated at 50% and applied at 1bar.

Salt chipping

To finish, You must remove the salt. I used a toothbrush with some water and I brush … brush … and brush again. If you remember, I said you must use a hard and dry paints. That is the moment where you’re going to see if your paint it’s good.

after removing the salt
After removing the mask tape

Salt chipping on gunpla is a good way to have random chips on a your paint. I think it’s a simple technic which give good results.

See you soon 😉

Rusty Jo

It’s done, I finished this week-end the HG Jo Hound. It’s totally hand painting, it was a real pleasure ! I love to add weathering effect, dust and rust ♥️. I modifued some parts and adding a real green plastic lens … from my daughter’s toys 🙄.

I will probably write a post to describe all the products used to this realization.

To see more, you can go on its gallery : ▶️ here ◀️

See you soon 😉

HG Jo hound 1/144

I can’t use my airbrush during summer, so I worked with my brushes. I build the HG jo Hound from Kyoukai Senki anime series.

First, I modified some parts of the mecha and I textured the armor plates. Then a black primer coat from an old can from Vallejo.

Then I worked on the different rust effects. It’s a real pleasure 😃😃 !

I open his gallery if you wanna see more pictures : ▶️ HERE ◀️

Star Wars legion AAT #01

I put my MG Exia on the side for few weeks. I prefer finish this star wars legion model kit : AAT char. You can see this vehicule in episode 1 and the animated serie clone wars.

It’s for me the occasion to try a lot of new technics and paints. For example, I used liquid mask with a succession of different colors for the chipping effect. I use the Mr. Color paints which is just … amazing. Moreover, this product is really durable and strong, I hope the color will stay like that.
It’s not finish but the most important is to take a lot of fun.

I put all the photos in his own gallery.

See you soon 😉

Tau empire Commander #03

It’s done ! It was difficult for me to work with this scale, but it’s a good training. I will do a gallery for it in few days, if I’ve got enough time.

❓❓ Do you like it ? ❓❓❓

See you soon 😉 … with the MG Exia !!!!